Skip to product information
The M 2.1AMP delivers up to 700 W of output power from a remarkably compact chassis, thanks to Audiotec Fischer's proprietary Class HD technology. Switchable between mono and stereo modes, this micro amplifier drives powerful subwoofers at 2 Ohms or front/rear speaker systems at 4 Ohms with equal ease. A signal-to-noise ratio of 108 dB and total harmonic distortion below 0.02% ensure pristine audio reproduction across a 10 Hz to 40 kHz frequency range. The fully stabilised power supply and Start-Stop capability keep performance consistent even when the battery voltage drops to 6 Volts during engine crank. With dimensions of just 35 x 85 x 110 mm, it fits into tight spaces for stealth installation in modern vehicles.
Amplifier technology: Class HD
Number of channels: 1 or 2 (switchable)
Max. output power (mono mode): 430 W RMS @ 2 Ohms
Power RMS @ 4 Ohms (mono): 210 W x 1
Power RMS @ 2 Ohms (mono): 350 W x 1
Power RMS @ 4 Ohms (stereo): 170 W x 2
Frequency response: 10 Hz - 40,000 Hz
Signal-to-noise ratio (analog input): 108 dB (A-weighted)
Total harmonic distortion (THD): < 0.02%
Damping factor: 100
Inputs: 2 x RCA/Cinch, 1 x Remote In
Input sensitivity (RCA/Cinch): 1 - 6 Volts
Input impedance (RCA/Cinch): 10 kOhms
Outputs: 2 x Speaker output, 1 x Remote Out
Operating voltage: 10.5 - 17 Volts (max. 5 sec down to 6 Volts)
Idle current: 500 mA
Power rating: DC 12 V, 40 A max.
Fuse: 1 x 30 A LP-Mini-fuse (APS)
Operating temperature range: -40°C to +70°C
Dimensions (H x W x D): 35 x 85 x 110 mm
Weight: 0.9 kg
Additional features: Variable input sensitivity, fully stabilised internal power supply, Start-Stop capability, ground switch, mono/stereo mode
MATCH M 2.1AMP Micro Amplifier 700W Class HD
£389.00
Sale price
£389.00
Regular price
Amplifier technology: Class HD
Number of channels: 1 or 2 (switchable)
Max. output power (mono mode): 430 W RMS @ 2 Ohms
Power RMS @ 4 Ohms (mono): 210 W x 1
Power RMS @ 2 Ohms (mono): 350 W x 1
Power RMS @ 4 Ohms (stereo): 170 W x 2
Frequency response: 10 Hz - 40,000 Hz
Signal-to-noise ratio (analog input): 108 dB (A-weighted)
Total harmonic distortion (THD): < 0.02%
Damping factor: 100
Inputs: 2 x RCA/Cinch, 1 x Remote In
Input sensitivity (RCA/Cinch): 1 - 6 Volts
Input impedance (RCA/Cinch): 10 kOhms
Outputs: 2 x Speaker output, 1 x Remote Out
Operating voltage: 10.5 - 17 Volts (max. 5 sec down to 6 Volts)
Idle current: 500 mA
Power rating: DC 12 V, 40 A max.
Fuse: 1 x 30 A LP-Mini-fuse (APS)
Operating temperature range: -40°C to +70°C
Dimensions (H x W x D): 35 x 85 x 110 mm
Weight: 0.9 kg
Additional features: Variable input sensitivity, fully stabilised internal power supply, Start-Stop capability, ground switch, mono/stereo mode